Lifters & Tilters

Here are details of Canada's finest range of Lifters and Tilters for handling a wide range of loads. They are used by all kinds of industries, including automotive, electrical, metalworking, etc. They enhance safety, ergonomics and productivity.
Standard models handle loads to 6,000 pounds (2 700 kg). Customized models for higher load weights are available. All models deliver maximum uptime with minimum service.
LIFTANDMOVE uses only the finest quality components in all its products.

	LIFT & TILT TABLE A Lift & Tilt Table raises a container filled with parts or an empty one for parts replenishment. It also tilts the container forward for easy access to contents, bringing everything within easy reach of the operator. Lift and tilt functions are continuously adjustable, for good ergonomics, enhanced safety and higher productivity. The table is of heavy steel construction with air spring actuators on both the lift and the tilt. Lift pins are permanently lubricated.
	PNEUMATIC LIFT TABLE Air spring-actuated lift tables by LIFTANDMOVE provide a clean, low-maintenance approach to lifting loads to 6,000 pounds (2 700 kg). Lifts operate direct from plant air of 80 to 100 psi. Installation is simple, virtually anyone can do it. Features include serviceable rollers and permanently lubricated bearings.
	LIFT & ROTATE TABLE With Lift & Rotate Tables you can raise and rotate loads for all-round access at just the right height. Manual rotation is made easy by a precision turntable bearing or friction-free air casters. Spring-loaded detent and detent engagement plates are available for 90° and 180° points.
	PNEUMATIC TILTER Pneumatic tilters by LIFTANDMOVE let you tilt a container toward the operator for ergonomic and productivity benefits. Pneumatic tilters feature an air spring actuator, dual high-strength restraint chains and heavy ¾-inch (18 mm) steel deck construction.

Accessories for Lifters & Tilters

	Wire-reinforced safety skirt to minimize pinch points
	Safety pilot-operated check valve - locks the lift or tilt functions should a hose rupture.
	Optional tilt deck dampener, to reduce bounce.
	Foot valve controls standard; pedestal-mount controls optional.

For more information or to discuss a particular need, call or email us today. We will provide the solution.